Gutter Top Rafter Bracket Universal Galvanised Steel Fascia Support Fixings (Pack of 5, 300mm)
by SPARES2GO
£43.39
**Free Tracked Shipping**
Universal Galvanised Steel Top Fix Gutter Rafter Brackets (300mm, Pack of 5)
Brand new, premium quality pack of 5 universal top fix gutter rafter brackets. These brackets are typically installed during the roofing process and simply nail or screw into the top of the roof joist before the roof coverings are added. They are easier to fit than other brackets due to easy access. Made with galvanised steel - ensuring rust / weather / corrosion resistance and long life. Includes screws, nuts and washers for easy installation.
Kit Contains:
5 x Top Fix Rafter Brackets
5 x Screws
5 x Nut and Washers
Specifications:
Arm Length: 300mm
Front Height: 118mm
Front Opening: 65mm
Mounting Hole Distance: 90mm
Material: Galvanised Steel
Standard: BS EN 12200 / BS EN 607
Colour: Silver
Heavy Duty
Weather Resistant
Rust Resistant
Corrosion Resistant
Installation:
These top rafter brackets are generally used on properties where there is no fascia board at the eaves (often referred to as open eaves).
The rafter brackets are screwed onto the top of the foot of the rafter at the eaves. A standard fascia bracket is then attached to the vertical section of the rafter arm using the small nut and bolt supplied.
The fascia brackets can then be adjusted up or down to ensure that the correct fall is achieved on the gutter.
Brand new, premium quality pack of 5 universal top fix gutter rafter brackets. These brackets are typically installed during the roofing process and simply nail or screw into the top of the roof joist before the roof coverings are added. They are easier to fit than other brackets due to easy access. Made with galvanised steel - ensuring rust / weather / corrosion resistance and long life. Includes screws, nuts and washers for easy installation.
Kit Contains:
5 x Top Fix Rafter Brackets
5 x Screws
5 x Nut and Washers
Specifications:
Arm Length: 300mm
Front Height: 118mm
Front Opening: 65mm
Mounting Hole Distance: 90mm
Material: Galvanised Steel
Standard: BS EN 12200 / BS EN 607
Colour: Silver
Heavy Duty
Weather Resistant
Rust Resistant
Corrosion Resistant
Installation:
These top rafter brackets are generally used on properties where there is no fascia board at the eaves (often referred to as open eaves).
The rafter brackets are screwed onto the top of the foot of the rafter at the eaves. A standard fascia bracket is then attached to the vertical section of the rafter arm using the small nut and bolt supplied.
The fascia brackets can then be adjusted up or down to ensure that the correct fall is achieved on the gutter.